CANSORB® RX - Polyethylene Lined, Activated Carbon Adsorbers
Remediation equipment for liquid phase activated carbon adsorption systems for environmental remediation applications
The CANSORB RX series of activated carbon adsorbers is fabricated of carbon steel and have a bonded nominal 200 mil lining of seamless polyethylene which can withstand the rigors of environmental remediation applications. Activated carbon discharge and drain lines can be provided with ball valves. The liquid collection system is designed to promote even flow distribution and thus efficient utilization of the activated carbon. The liquid outlet is designed to maintain a liquid level above the activated carbon bed. Manways are 18" in diameter for easy access and for removal and replacement of activated carbon and other media. The activated carbon vessels are provided with lifting lugs and fork channels. Specifications and properties are subject to change without notice.
*Specifications and properties are subject to change without notice.
Liquid Phase Carbon Adsorbers - Steel Drums Overview
|
MODEL
PDF FILES* |
Nominal FLOW (GPM)
|
MAX
PRESS (PSIG) |
MAX TEMP (deg F)
|
FNPT INLET / OUTLET
(IN) |
MAXIMUM ADSORBENT FILL (LBS)
|
SHIPPING WEIGHT STANDARD FILL
(LBS) |
|
|
||||||
|
60
|
30
|
130
|
2 / 2
|
875
|
1380
|
|
|
90
|
30
|
130
|
3 / 3
|
1600
|
2040
|
|
| C-75 RX | 140 | 30 | 130 | 3 / 4 | 2500 | 3420 |
| C-100 RX | 200 | 30 | 130 | 3 / 4 | 3600 | 4790 |
NOTES:
- Nominal flow may be conservative. Desired contact time may allow higher or lower flow rates.
- Dry virgin activated or reactivated carbon provided as standard adsorbent.
- Maximum adsorbent fill is based on a bed density of 27 lb/ft3.
- Maximum adsorbent fill can differ based on variable bed density and alternate adsorbents.
- Vessels are available in higher pressure ratings in accordance with ASME Section VIII.
- Pressure drops are based on a dense packed bed of activated carbon.
