Liquid Phase Activated Carbon Adsorber
CANSORB® XP- Polyethylene Drum
The CANSORB® XP series of polyethylene drums is TIGG's activated carbon adsorber designed for liquid phase remediation. These activated carbon adsorbers are constructed of cross-linked polyethylene which can withstand the rigors of environmental remediation applications.
The CANSORB XP series of activated carbon adsorbers are intended to be disposable units with non-removable heads. The adsorber design promotes efficient use of activated carbon filter media and even flow distribution. The CANSORB XP is provided with either virgin activated carbon or reactivated carbon filter media as a standard adsorbant . Please note the pressure loss vs flow rate chart at the bottom of this page.
*Specifications and properties are subject to change without notice.
Liquid Phase Carbon Adsorbers - Polyethylene Drum Overview
|
MODEL
PDF FILES* |
MAX FLOW (GPM)
|
MAX
PRESS (PSIG) |
MAX TEMP (deg F)
|
FNPT INLET / OUTLET
(IN) |
MAXIMUM ADSORBENT FILL (LBS)
|
SHIPPING WEIGHT STANDARD FILL
(LBS) |
|
|
||||||
|
2
|
6
|
130
|
3 / 4
|
50
|
60
|
|
|
5
|
6
|
130
|
3 / 4
|
110
|
112
|
|
NOTES:
- Desired contact time may allow higher or lower flow rates.
- Dry virgin activated or reactivated carbon provided as standard adsorbent.
- Maximum adsorbent fill is based on a bed density of 27 lb/ft3.
- Maximum adsorbent fill can differ based on variable bed density and alternate adsorbents.
- Pressure drops are based on a dense packed bed of activated carbon.
