ECONOSORB TM LP - Activated Carbon Adsorber
Portable Steel Vessel
Remediation equipment for liquid phase activated carbon adsorption systems for environmental remediation applications
The Econosorb LP Portable Steel Vessel Series Liquid Phase Adsorbers are fabricated from carbon steel and provided with a high solids epoxy lining for long life. Two 2" steel FNPT inlet/outlet fittings on the top of the vessels are connected to PVC internals for good flow distribution in down flow operating mode. The units have a screened drain, 20 inch bolted top manway for easy access. The forklift access slots and lifting lugs and overall height make this unit truly transportable. These economical units can be filled with any of TIGG’s media including activated carbon, metal removal media. oil removal media and perform well in low pressure applications. Specifications and properties are subject to change without notice.
*Specifications and properties are subject to change without notice.
Liquid Phase Activated Carbon Adsorbers - ECONOSORB LS
Steel Drums Overview
|
MODEL PDF FILES* |
Nominal FLOW (GPM) |
MAX PRESS (PSIG) |
MAX TEMP (deg F) |
FNPT INLET / OUTLET (IN) |
MAXIMUM ADSORBENT FILL (LBS) |
SHIPPING WEIGHT STANDARD FILL (LBS) |
|
|
||||||
|
35 |
12 |
130 |
2 / 2 |
1000 |
1550 |
|
|
60 |
12 |
130 |
2 / 2 |
2000 |
2600 |
|
|
100 |
12 |
130 |
2 / 2 |
3000 |
3850 |
|
NOTES:
- Dry virgin activated or reactivated carbon provided as standard adsorbent.
- Adsorbent fill is based on a bed density of 27 lb/ft3.
- Adsorbent fill can differ based on variable bed density and alternate adsorbents.
- Pressure drops are based on a dense packed bed of activated carbon.